Tuesday, 29 July 2014

Elen's Prom Dress - Part 2 - boned corset bodice


Elen in her finished prom dress
My daugher Elen wanted a strapless boned bodice for her prom dress and I'd been lucky enough to find a pattern for a bodice and skirt that I thought I could adapt.  (You can read about her design ideas in Elen's Prom Dress - Part 1).

I'm giving you a sneaky peek of the finished dress - as the photos of the work in progress are a bit dull!

Here she is at my mum's house on the night of the prom - checking out her hair and make up in the mirror. She looked absolutely stunning - really elegant - I was very proud of her.

As you can see, the dress has a sweetheart bodice and self lacing at the back - exactly as she'd asked for.

Cotton toile for accurate sizing




I thought I'd better do a cotton toile first (a sample made up using the pattern to check sizing - but using cheaper fabric) as she seemed to be in between the sizes on the pattern.

And as you can see from the photo of the half bodice toile on the left, I needed to let the waist and hips out a bit, but take the bust in, which was surprising as I thought I'd have to let the bust out based on the measurements on the pattern sizing. Motto - never trust the pattern! Bodies don't come in standard sizes....

From my toile I was able to adjust the paper pattern - I just creased small darts where needed and pinned into place before trying again. I made another cotton toile using the adapted pattern - which fitted perfectly! Hooray!

Boning in tape casing stitched to seam lines




The pattern I was using was unlined so the casing for the plastic boning was supposed to be stitched straight to the bodice.

But I didn't want the stitching lines to show at the front, and I was planning on adding a lining, so I decided to add the boning to the bodice lining rather than to the bodice top layer.

Luckily I decided to test my technique using the cotton toile bodice - the bodice seemed to shrink a little when the boning was applied - so I was able to allow for this when cutting out the lining.



Side view of boned lining



Elen had chosen a soft silver duchesse satin as an underskirt and bodice - that would be overlaid by chiffon.

I had bought some thin lining fabric for the petticoat layer of the skirt but I thought it might not stand up to the pressures of the boning and the tight lacing, so I decided to use the firmer satin as my bodice lining.

The photos show the satin bodice lining (with the right shiny side facing in towards the body) with a soft herringbone tape stitched along each of the seam lines and topstitched down to form a casing.

I cut the boning to size and added a soft binding to the ends so they wouldn't poke into her.  My tape was wider than needed but it didn't matter as it was all hidden inside once I'd added the lining to the main bodice.


If you'd like some more technical help with boned bodices, including how to curve and cover the boning ends so they don't poke into the wearer and how to adjust paper patterns, here are some fab blogs and online articles I found helpful.



Bodice version 1 - unboned







I made the main bodice from the same silver duchesse satin overlaid with aqua chiffon - actually I made two. Elen initially chose a gorgeous pale aqua chiffon in a very fine weave. I treated both the satin and the chiffon layers as one fabric, so all the chiffon edges would be enclosed in the seam allowances. This fine chiffon was really hard to work with - it kept slipping around on the shiny satin - I had to pin, re-pin; tack and re-tack lots of time to get it to sit flat.

But once I'd made it up, we realised it was too pale for her - you can see the first attempt in this photo (at this stage the boned lining isn't attached so it looks rather loose and floppy). She also thought it was too shiny - the fine weave let a lot of the satin show through.

So we chose a darker chiffon which was a much stronger colour on her. It was also a heavier weave that let less shine through and I felt would help the skirt hang better. And there was another bonus, this chiffon was coarser - more granular than slippery, so it was much easier to overlay on the satin.

The new bodice was stitched to the lining along the top seam - I left the two back seams open so I could add the corset lacing loops later. Ok - that was (relatively) easy! Now I needed to work out how to attach the skirt to the bodice!  But that can wait for next time.

Sunday, 27 July 2014

Elen's Prom Dress - Part 1 - A design concept


We'd left it rather late to sort out my daughter's prom dress - this is also her main GCSE exam year and due to the staggered approach her school takes, she's either been sitting exams or studying hard since November which rather limited the time she had to go shopping!

Elen had pretty firm ideas on what she wanted - one of her optional subjects was Textile Design Technology and she had already designed her own perfect dress!  

Elegant with a historic feel. Strapless with a sweetheart neckline. A very fitted bodice with boning. With a low waistline (dipped at the front) and a corset back. Full length with a flowing skirt that is not too puffy but has a very full hemline. And in blue or green chiffon over satin. And maybe with a bit of diamante.

Should be easy enough, I thought. But after numerous online searches, lots of phone-calls and visits to loads of shops across South Wales, still no dress. There are hundrends of beautiful dresses out there. And most of them looked gorgeous on her. But none of them were right... too puffy... wrong bodice... too much bling... wrong colour... too straight... I started to regret encouraging her to do the design course!

Ok, Mum, she said - you can make me a dress, rather naively assuming I could just whip up something to her specification! I did make my own wedding dress and have done bridesmaids and prom dresses for family and friends. But I usually started with a pattern not a design concept. And I have an irrational fear of working with chiffon! However, I do make stage costumes without patterns, and although she is almost an adult, she does seem to still have a child's belief that her mum can do anything. So I said I'd give it a go. Brave words.

I looked at dress patterns but there is nothing at all similar to what she wants - they were either too basic or followed current fashion - there were lots of empire line and sheath styles. I even looked at traditional wedding dress patterns - some of them had almost the right bodice but the skirts were high waisted or were way too puffy.

I eventally managed to track down a pattern for old fashioned wedding underwear - a boned corset top and a full "A-line" petticoat - the sort of thing you'd expect to see under a Victorian costume. They were separate pieces but I hoped I would be able to put them together as a dress - at least for the satin under layer.

So far, that was the easy bit. I decided to have a go at the boned bodice first, before worrying about how to add the skirt. I'll share how I got on in my next blog post.